DIY Drum Machine – Circuit Bending

I have been working on a diy drum machine for a while now. I wanted to post this video to show it’s functionality.

The core of this drum machine is from an electronic drum stick. You swing the stick and it makes drum sounds. The stick made 3 sounds; Snare, bass drum, and high hat.

DIY Drum Machine

When you swing the drum stick, it plays a snare sound. There are two buttons on the stick, that when pressed AND the stick is swung, play two more sounds. So this was easy to hook up to a 3-way switch with up as one button, down as another button, and middle was just like swinging the drum stick without pressing a button.

DIY Drum Machine

I rigged it up to a 555 timer and a 4017 decade counter and some pots and switches, and away it went. There is still some glitching that happens I think because of some switches which aren’t wired to ground to de-bounce them.

DIY drum machine - time signature controlerDIY drum machine - switches to control sound typeDIY drum machine - 555 timerDIY drum machine - 4017 decade counter

The 555 timer triggers the drum sound and advances the 4017. The 4017 sends a pulse through one of 10 3-way switches to hold the particular sound. The sound selection is set with the 3-way switch. I hope that makes sense.

Like I said, it’s a work in progress.

DIY drum machine - control board layout design

The case is from a kids toy (big surprise, I know). It was a light box for tracing. It use to have two lightbulbs inside and a semi-transparent screen. The cool thing about is that it has a battery compartment built in. All I had to do was modify it for the voltage I was using. I just shrunk it down. Easy (yeah right).

I painted it up white first and then spray painted a stencil of a fist on top of it. The body was also painted red. The final step for the paint job was to do some clear coat. All in all, a pretty sweet paint job.

Circuit Bending a DIY Drum Machine

In this video, you can see holes for the LEDs that will indicate which point in the sequence it’s at. I am having a heck of a time with that. It seems like, when connected, the sound plays but the LEDs don’t light up. I don’t know if it’s a lack of current or what. I have tried the LEDs in series and in parallel. Neither work now. The joke is, it all worked at one point when it was on a bread board. Upon soldering everything up, everything started changing. I suppose that is the nature of the beast.

I would love to hear your thoughts.

Happy Bending,
Nick

Advertisements

Cinco de Synth!

Happy Cinco de Mayo!

I figured I would make a special post to commemorate such a historic day… for the Mexican people.

cinco de mayo

Wikipedia says this…

Cinco de Mayo (Spanish for “fifth of May”) is a holiday held on May 5 that commemorates the Mexican army’s unlikely victory over French forces at the Battle of Puebla on May 5, 1862, under the leadership of General Ignacio Zaragoza Seguín. It is celebrated primarily in the state of Puebla and in the United States. While Cinco de Mayo sees limited significance and celebration nationwide in Mexico, the date is observed nationwide in the United States and other locations around the world as a celebration of Mexican heritage and pride.

Viva General Ignacio Zaragoza Seguín! Viva, viva!!!

I have celebrated by breaking out a bottole of – drum roll please…
Stone 10th Aniversary India Pale Ale.

05_03_2010 002

It’s from 2006! It has been sitting, chilled for 4 years! And let me tell you… it’s smooth.

05_03_2010 001

This 10% ABV led me to do something… a little crazy. I plugged my melody making sequencer toy into my drum machine. I had to play around a little but I got it to sync up almost perfectly. It works!

Here is a video.

Happy Cinco de Mayo and of course…

Happy Bending!