DIY Drum Machine – Circuit Bending

I have been working on a diy drum machine for a while now. I wanted to post this video to show it’s functionality.

The core of this drum machine is from an electronic drum stick. You swing the stick and it makes drum sounds. The stick made 3 sounds; Snare, bass drum, and high hat.

DIY Drum Machine

When you swing the drum stick, it plays a snare sound. There are two buttons on the stick, that when pressed AND the stick is swung, play two more sounds. So this was easy to hook up to a 3-way switch with up as one button, down as another button, and middle was just like swinging the drum stick without pressing a button.

DIY Drum Machine

I rigged it up to a 555 timer and a 4017 decade counter and some pots and switches, and away it went. There is still some glitching that happens I think because of some switches which aren’t wired to ground to de-bounce them.

DIY drum machine - time signature controlerDIY drum machine - switches to control sound typeDIY drum machine - 555 timerDIY drum machine - 4017 decade counter

The 555 timer triggers the drum sound and advances the 4017. The 4017 sends a pulse through one of 10 3-way switches to hold the particular sound. The sound selection is set with the 3-way switch. I hope that makes sense.

Like I said, it’s a work in progress.

DIY drum machine - control board layout design

The case is from a kids toy (big surprise, I know). It was a light box for tracing. It use to have two lightbulbs inside and a semi-transparent screen. The cool thing about is that it has a battery compartment built in. All I had to do was modify it for the voltage I was using. I just shrunk it down. Easy (yeah right).

I painted it up white first and then spray painted a stencil of a fist on top of it. The body was also painted red. The final step for the paint job was to do some clear coat. All in all, a pretty sweet paint job.

Circuit Bending a DIY Drum Machine

In this video, you can see holes for the LEDs that will indicate which point in the sequence it’s at. I am having a heck of a time with that. It seems like, when connected, the sound plays but the LEDs don’t light up. I don’t know if it’s a lack of current or what. I have tried the LEDs in series and in parallel. Neither work now. The joke is, it all worked at one point when it was on a bread board. Upon soldering everything up, everything started changing. I suppose that is the nature of the beast.

I would love to hear your thoughts.

Happy Bending,
Nick

Drum Machine – Work in Progress

This is the project I am working on right now.

This is a drum machine that I am making. The core is from an old electronic drumstick that I found at a thrift store. It is opperated by swinging it just like a real drum stick and stopping it in mid air. When the electronic drumstick stops, it makes a sound.

The default sound is a snare but there are also two more sounds. If you hold one button and swing the electronic drum stick it makes a bass drum sound. The other button has a crash symbol.

The drum machine is being timed by a 555 timer and a 4017 decade counter. It will have a 3-way switch for every step in from the 4017. One for each sound. In addition, it will have an on/off switch and (if all goes well) a pitch adjustment for every step.

Happy bending!